A burst pipe is a homeowner’s worst nightmare. Whether it’s caused by a sudden freeze, high water pressure, or aging copper, the resulting flood can feel overwhelming. At Davis Plumbing, we specialize in 24/7 emergency response, but what you do in the first 10 minutes can save you thousands in restoration costs.

If you are standing in water right now, follow these five steps immediately.

1. Shut Off the Water

As we covered in our guide to plumbing repair basics, you must stop the flow of water immediately. Turn your main water shut-off valve clockwise until it stops. If you can’t find it, call us at (951) 657-0393 and we will help you locate it over the phone.

2. Turn Off the Electricity

Water and electricity are a deadly combination. If the leak is near outlets, your electrical panel, or major appliances, shut off the power at the main breaker. Do not step into standing water if the power is still on.

3. Drain the Lines

Even after the main valve is off, there is still water sitting in your pipes. Open your cold water faucets to drain the remaining water out of the system and away from the leak site. If you have a water heater issue, do not drain the hot water until the unit is powered down.

4. Document the Damage

Before you start the cleanup, take photos and videos of the burst pipe and the affected rooms. This documentation is vital for your insurance claim. Once the “evidence” is recorded, you can begin mopping up to prevent mold growth.

5. Call Davis Plumbing

Burst pipes require professional repair to ensure the line is secure and your water pressure is balanced. We provide rapid-response septic service near me and emergency plumbing throughout the 951 area code.

Fast Repairs in Riverside County

Don’t let a burst pipe ruin your home. Davis Plumbing has the tools and experience to fix the leak and inspect your entire system for future weak spots. We are your local experts for emergency repairs and septic tank inspection.

Call Davis Plumbing at (951) 657-0393—we’re on our way!